Industry News

Why should medical device aluminum profile be powder sprayed?

Update time : 2022-11-14 18:48:36

The higher the purity of the medical device aluminum profile, the better the corrosion resistance. Pure aluminum will have consequences with oxygen in the air. A thin layer of fine natural oxide film will be produced on the surface of the medical device aluminum profile. It is much thicker and faster than other metal oxide films, and then prevents the decay of harmful gases and water in the air and plays a maintenance role.

Although the corrosion resistance of pure aluminum is good, the mechanical strength is poor, which restricts the use of medical device aluminum profile to a certain level. Therefore, we add appropriate magnesium, copper, zinc and other metals in the medical device aluminum profile. Made of various types of aluminum alloy, aluminum alloy mechanical strength is high, so that the mechanical strength of the medical device aluminum profile greatly improved, the use of the scope is greatly expanded, although aluminum alloy mechanical strength is high, but the corrosion resistance is worse than pure aluminum, so it is possible to be corrupted by oxidation.

Medical device aluminum profile light weight, high strength, corrosion resistance, etc., generally used for wheelchairs, stretchers, nursing beds, medical accompanying chairs, medical equipment and so on. This requires powder coating to maintain the medical device aluminum profile.

After powder coating, medical aluminum has high corrosion resistance, color diversity, good nominal texture and many other advantages. The medical device aluminum profile after powder spraying has a service life of 30 years under normal conditions. Its surface coating in 5-10 years to ensure that no fading, no discoloration, no cracking. Its weather resistance and corrosion are better than ordinary aluminum color diversity.

Previous : Design principle of aluminum profile mosaic structure

Next : Where are industrial aluminum profiles mainly used and angle spliced installation

How to assemble and debug door and window aluminum profiles?

Jul .28.2023

The assembly and debugging of door and window aluminum profiles is one of the key links in the process of making doors and windows.

How to do a good job of cleaning industrial aluminum profiles?

Jul .17.2023

Spraying cleaning method of industrial aluminum profiles is widely used, because of complex equipment, high process requirements, poor cleaning effect, then how to better do spray cleaning of industrial aluminum profiles?

Aluminum extrusion profile six places are required during the stretching process

Jul .07.2023

The aluminum extrusion profile must be cooled to below 50 degrees before stretching. If the temperature is too high, stretching will not only burn the human body, the hair belt, but also expose absolute waste products such as bending, twisting, and poor performance before and after aging, because the stress in the aluminum alloy profile can not be completely eliminated.

Curtain wall aluminum profile purchase mainly see where?

Jul .06.2023

Appearance quality of curtain wall aluminum profile: the surface of anodic oxide film is not allowed to have electrical burns, oxide film falling off and other defects; Electrophoretic, powder, fluorocarbon profile paint film should be uniform, neat, smooth, do not allow wrinkles, cracks, bubbles, flow signs, inclusions and paint film fall off and other defects, but allow local film within 80 mm at the end of the profile.

Hammy Han