Industry News

Why do people like to build sunrooms with thermal break aluminum profiles?

Views : 98
Update time : 2022-12-02 11:23:38
Nowadays, thermal break aluminum profile is widely used as the main frame of the sun room. Mainly because the thermal break aluminum profile has super thermal insulation performance. Up to see how strong the thermal insulation performance of broken bridge aluminum is, why we must choose it as the main frame material.
In the past, people tend to build the sun room with steel structure, but gradually found that steel structure has many disadvantages: rust, aging, deformation and air leakage and so on. With the improvement of the manufacturing process requirements for the sun room, the thermal break aluminum profile with more superior performance has replaced the steel structure material and become the main material for the sun room.
Thermal break aluminum profile is the middle of the aluminum alloy profiles separated two pieces, with heat insulation strip will be indoor and outdoor two layers of aluminum profiles are separated and closely connected to them into a whole, constitute a new heat insulation type aluminum profile. Thoroughly solve the shortcomings of aluminum alloy conduction heat dissipation fast.
The thermal break aluminum profile of the heat conduction coefficient K value is 3W/㎡K below, than the ordinary profile heat loss is reduced by half, reduce the heating cost of about 30%, so as to achieve strong thermal insulation effect.
In winter, broken-bridge aluminum doors and windows with insulation strips can reduce the heat loss through the doors and windows by at least 1/3; In the summer, windows and doors with insulation bars are the best way to block the heat from outside.
Do not use inferior heat insulation strip, the quality of heat insulation strip seriously affects the safety of profiles, may cause thermal break aluminum profile from the heat insulation strip joint fracture, so the insulation strip material selection and manufacturing process is very key.
Warm tip: The sun room constructed with inferior materials will not only be used for a short time, but also have many security risks.
If we want to build the broken bridge aluminum sunshine room with superior performance, we can design the warmest and livable sunshine room by choosing professional and reliable housing service providers and high-quality materials with the highest cost performance.
Related News
Read More >>
How to assemble and debug door and window aluminum profiles? How to assemble and debug door and window aluminum profiles?
Jul .28.2023
The assembly and debugging of door and window aluminum profiles is one of the key links in the process of making doors and windows.
How to do a good job of cleaning industrial aluminum profiles? How to do a good job of cleaning industrial aluminum profiles?
Jul .17.2023
Spraying cleaning method of industrial aluminum profiles is widely used, because of complex equipment, high process requirements, poor cleaning effect, then how to better do spray cleaning of industrial aluminum profiles?
Aluminum extrusion profile six places are required during the stretching process Aluminum extrusion profile six places are required during the stretching process
Jul .07.2023
The aluminum extrusion profile must be cooled to below 50 degrees before stretching. If the temperature is too high, stretching will not only burn the human body, the hair belt, but also expose absolute waste products such as bending, twisting, and poor performance before and after aging, because the stress in the aluminum alloy profile can not be completely eliminated.
Curtain wall aluminum profile purchase mainly see where? Curtain wall aluminum profile purchase mainly see where?
Jul .06.2023
Appearance quality of curtain wall aluminum profile: the surface of anodic oxide film is not allowed to have electrical burns, oxide film falling off and other defects; Electrophoretic, powder, fluorocarbon profile paint film should be uniform, neat, smooth, do not allow wrinkles, cracks, bubbles, flow signs, inclusions and paint film fall off and other defects, but allow local film within 80 mm at the end of the profile.