Company News

What problems should be paid attention to when cutting industrial aluminum profiles?

Views : 106
Update time : 2022-09-30 18:58:23
Industrial aluminum profile cutting is an aluminum profile finishing service, which requires the use of special CNC cutting equipment. So, what should be paid attention to when cutting industrial aluminum profiles?
Precautions for cutting industrial aluminum profiles:
1. When cutting, the aluminum profiles should be placed flat. If they are not placed flat, the cut section will be uneven and the angles will not correspond to each other, so there is no way to use them, resulting in a waste of profiles.
2. The saw blade cannot be directly used for cutting. It is necessary to choose the appropriate lubricating oil. If the lubricating oil is not used for direct cutting, the cut surface of the cut aluminum profile will have many burrs or unevenness, which is difficult to clean and damages the saw. piece.
3. Choose a professional saw blade. The hardness of industrial aluminum profiles is not as large as that of steel, and it is relatively easy to saw. However, because the hardness is not large enough, it is easy to stick to aluminum, so the blade must be sharp and should be replaced after a period of use.
4. When cutting at special angles, such as bevel cutting, it is necessary to control the angle of the profile to ensure the accuracy of cutting. The error of general angle cutting is between ±1°.
The above are the problems that need to be paid attention to when cutting industrial aluminum profiles. It can be seen from these places that industrial aluminum profiles cannot be processed casually, and precise cutting is required on aluminum profile cutting machines.
Related News
Read More >>
How to assemble and debug door and window aluminum profiles? How to assemble and debug door and window aluminum profiles?
Jul .28.2023
The assembly and debugging of door and window aluminum profiles is one of the key links in the process of making doors and windows.
How to do a good job of cleaning industrial aluminum profiles? How to do a good job of cleaning industrial aluminum profiles?
Jul .17.2023
Spraying cleaning method of industrial aluminum profiles is widely used, because of complex equipment, high process requirements, poor cleaning effect, then how to better do spray cleaning of industrial aluminum profiles?
Aluminum extrusion profile six places are required during the stretching process Aluminum extrusion profile six places are required during the stretching process
Jul .07.2023
The aluminum extrusion profile must be cooled to below 50 degrees before stretching. If the temperature is too high, stretching will not only burn the human body, the hair belt, but also expose absolute waste products such as bending, twisting, and poor performance before and after aging, because the stress in the aluminum alloy profile can not be completely eliminated.
Curtain wall aluminum profile purchase mainly see where? Curtain wall aluminum profile purchase mainly see where?
Jul .06.2023
Appearance quality of curtain wall aluminum profile: the surface of anodic oxide film is not allowed to have electrical burns, oxide film falling off and other defects; Electrophoretic, powder, fluorocarbon profile paint film should be uniform, neat, smooth, do not allow wrinkles, cracks, bubbles, flow signs, inclusions and paint film fall off and other defects, but allow local film within 80 mm at the end of the profile.