Industry News

What is the future trend of aluminum profiles?

Update time : 2022-09-15 19:01:47

The future trend of aluminum profiles may replace traditional building materials, mainly reflected in:

1. Buildings made of aluminum profiles are not only rapid prototyping, but also cost-effective. Concrete usually requires a lot of formwork and curing time compared to concrete.

2. The aluminum profile bridge deck is 80% lighter than concrete, and does not need to strengthen the supporting bridge elements. The aluminum profile manufacturer can also provide additional bridge width and capacity without increasing the bridge load. Corrosion-resistant aluminum alloy decks require no paint and minimal maintenance, and are better suited than steel or concrete where de-icing chemicals can be used.

3. The low temperature toughness of aluminum makes it an ideal structural material for roads and bridges in cold climates. In the united states and europe, aluminum also has new, easy-to-repair properties. In north america, bridges with aluminum decks or superstructures were originally built in the 1940s. More than 50 aluminum alloy bridges have been built in europe, and this number is increasing year by year. Since aluminum is lighter than steel and concrete, it doesn't rust and doesn't require painting or protective coatings, which reduces maintenance and installation time, which in turn reduces costs. These are clear advantages that aluminum has over other materials.

4. Aluminum is an ideal material, which is a movable bridge, bridge and narrow deck of the road. Since seismic force is proportional to weight, aluminum is also an excellent bridge seismic reinforcement. The new aluminum panel system requires factory prefabrication, welding, and prefabricated aluminum deck panels can be installed faster than other systems without on-site welding.

Previous : Causes of bending of hot extruded aluminum profiles (how to solve the bending of aluminum profiles?)

Next : Which manufacturers need to use aluminum profiles, which are widely used?

How to assemble and debug door and window aluminum profiles?

Jul .28.2023

The assembly and debugging of door and window aluminum profiles is one of the key links in the process of making doors and windows.

How to do a good job of cleaning industrial aluminum profiles?

Jul .17.2023

Spraying cleaning method of industrial aluminum profiles is widely used, because of complex equipment, high process requirements, poor cleaning effect, then how to better do spray cleaning of industrial aluminum profiles?

Aluminum extrusion profile six places are required during the stretching process

Jul .07.2023

The aluminum extrusion profile must be cooled to below 50 degrees before stretching. If the temperature is too high, stretching will not only burn the human body, the hair belt, but also expose absolute waste products such as bending, twisting, and poor performance before and after aging, because the stress in the aluminum alloy profile can not be completely eliminated.

Curtain wall aluminum profile purchase mainly see where?

Jul .06.2023

Appearance quality of curtain wall aluminum profile: the surface of anodic oxide film is not allowed to have electrical burns, oxide film falling off and other defects; Electrophoretic, powder, fluorocarbon profile paint film should be uniform, neat, smooth, do not allow wrinkles, cracks, bubbles, flow signs, inclusions and paint film fall off and other defects, but allow local film within 80 mm at the end of the profile.

Hammy Han