Industry News

What are the main accessories of industrial aluminum profiles

Update time : 2022-10-10 18:21:01

There are many types of industrial aluminum profile accessories, most of which can meet the needs of designers. The main accessories are bolts, nuts, corner pieces, connectors, end connection plates, gasket connection blocks, elastic fasteners, living hinges, hoof horns and casters.

1. Industrial aluminum profile frames usually use internal connection methods, using special round head bolts or special bolts. Before installation, threading and process mounting holes must be tapped at the profile connection; special round head bolts are usually used for high-strength connections of two-section profiles. Drilled and tapped at predetermined locations; flat bolts are matched with T-Nuts and are often used to connect decorative parts such as hinges and handles with profiles; T-bolts are placed directly in the grooves of the profiles and can be installed during installation Install. This is an important connection for installing corner fittings and other profile fittings. Different sizes and lengths of T-bolts can be selected according to different profiles, slot widths and installation requirements.

2. The main types of nuts mainly include flange nuts, square nuts, T-shaped nuts and elastic nuts. The elastic nut can be straight inserted into any assemblage point in the trough of the profile, and the spring steel ball on the back can fix its position, so the installation is very convenient and reliable, and it is one of the most commonly used accessories.

3. Corner fittings are commonly used connectors for aluminum profiles. They are usually used for vertical or cross connection of aluminium profiles. There are mainly three kinds of commonly used corner accessories, strong corner accessories and steering angle accessories. Common angle pieces are used to enhance the supporting force of connecting contour points, and can also be used as a connecting method for contours that need to be moved. Strong corner pieces are usually used for supporting and fixing profiles and profile points affected by strong force or vibration; for steering corner pieces, connecting with cross profiles.

Previous : What are the methods of how to dust the aluminum window shutters for daily cleaning?

Next : Requirements for anodizing process operation of aluminum profiles

How to assemble and debug door and window aluminum profiles?

Jul .28.2023

The assembly and debugging of door and window aluminum profiles is one of the key links in the process of making doors and windows.

How to do a good job of cleaning industrial aluminum profiles?

Jul .17.2023

Spraying cleaning method of industrial aluminum profiles is widely used, because of complex equipment, high process requirements, poor cleaning effect, then how to better do spray cleaning of industrial aluminum profiles?

Aluminum extrusion profile six places are required during the stretching process

Jul .07.2023

The aluminum extrusion profile must be cooled to below 50 degrees before stretching. If the temperature is too high, stretching will not only burn the human body, the hair belt, but also expose absolute waste products such as bending, twisting, and poor performance before and after aging, because the stress in the aluminum alloy profile can not be completely eliminated.

Curtain wall aluminum profile purchase mainly see where?

Jul .06.2023

Appearance quality of curtain wall aluminum profile: the surface of anodic oxide film is not allowed to have electrical burns, oxide film falling off and other defects; Electrophoretic, powder, fluorocarbon profile paint film should be uniform, neat, smooth, do not allow wrinkles, cracks, bubbles, flow signs, inclusions and paint film fall off and other defects, but allow local film within 80 mm at the end of the profile.

Hammy Han