Industry News

What are the differences between aluminum processing and aluminum profile processing?

Update time : 2022-08-15 11:52:22

Aluminum profiles are products made from aluminum and other alloying elements. Usually, it is first processed into castings, forgings, foils, plates, strips, tubes, bars, profiles, etc., and then processed by cold bending, sawing, drilling, assembling, and coloring. The main metal element of aluminum profiles is aluminum, and some alloying elements are added to improve the performance of aluminum. Aluminum profile is an alloy material, which is made of aluminum as raw material and alloys of different components. It needs to go through various processing procedures before it can be put into production. So what is the difference between aluminum processing and aluminum profile processing?

Aluminum processing: Aluminum processing refers to the process of casting aluminum ingots and aluminum rods through casting, rolling, extrusion, stretching, forging, surface treatment and other processes, which requires a series of professional production and processing steps to produce aluminum products suitable for various uses. In simple terms, that is, the aluminum billet is processed into wood by plastic processing method. Including aluminum bar, aluminum sheet, aluminum strip, aluminum foil, aluminum pipe, aluminum profile, aluminum wire, aluminum forgings, etc.

Aluminum profile processing: It belongs to a small category of aluminum processing, which refers to the process of extrusion and forming of aluminum bars through a die, including extrusion stretching, aging cooling, surface treatment, deep processing, and bending. And we often say that the aluminum profile cutting to length, punching and tapping, and rapid assembly belong to the deep processing steps of aluminum profiles.

In simple terms, aluminum processing refers to a broad range of aluminum alloy processing including aluminum profile processing, and aluminum profile processing refers to a subdivided profile processing under the aluminum processing category.

Previous : What is the processing thickness of industrial aluminum profiles related to?

Next : What are the methods for cleaning industrial aluminum profile frames?

How to assemble and debug door and window aluminum profiles?

Jul .28.2023

The assembly and debugging of door and window aluminum profiles is one of the key links in the process of making doors and windows.

How to do a good job of cleaning industrial aluminum profiles?

Jul .17.2023

Spraying cleaning method of industrial aluminum profiles is widely used, because of complex equipment, high process requirements, poor cleaning effect, then how to better do spray cleaning of industrial aluminum profiles?

Aluminum extrusion profile six places are required during the stretching process

Jul .07.2023

The aluminum extrusion profile must be cooled to below 50 degrees before stretching. If the temperature is too high, stretching will not only burn the human body, the hair belt, but also expose absolute waste products such as bending, twisting, and poor performance before and after aging, because the stress in the aluminum alloy profile can not be completely eliminated.

Curtain wall aluminum profile purchase mainly see where?

Jul .06.2023

Appearance quality of curtain wall aluminum profile: the surface of anodic oxide film is not allowed to have electrical burns, oxide film falling off and other defects; Electrophoretic, powder, fluorocarbon profile paint film should be uniform, neat, smooth, do not allow wrinkles, cracks, bubbles, flow signs, inclusions and paint film fall off and other defects, but allow local film within 80 mm at the end of the profile.

Hammy Han