Company News

What aluminum processing equipment will be used in the processing of aluminum profiles?

Views : 124
Update time : 2022-09-13 19:49:13
Aluminum profile processing is a prerequisite for aluminum profile processing projects, and these equipments are the basic hardware that aluminum profile processing enterprises must be equipped with. What is the basic equipment for processing aluminum materials?
1. Aluminum cutting machine
The cutting machine, as the name implies, is used to cut aluminum profiles. Generally, the extruded aluminum profiles are 6.02 meters, and the aluminum profiles required for the aluminum profile frame project are long or short. So it must be cut before fitting to the frame. It is also necessary to cut the aluminum profile. At present, the general aluminum profile processing plant can control the cutting error within +-0.3 mm.
2. Aluminum alloy tapping machine
The aluminum alloy tapping machine is actually a machine tool that uses a tap to process internal threads, which is also generally called tapping. Internal threading machine tools are widely used. At present, the development of aluminum tapping machines is relatively mature, and there are various models, mainly to break through various threaded holes.
3. Aluminum alloy punch
The aluminum profile punch is a punching machine. Many times, bolts are required to assemble the aluminum profile frame, and some require threaded holes. Some are not used, such as some plates, only need to drill holes of suitable diameter in the specified position. A punch can not only punch holes, but also bend sheets or profiles.
Related News
Read More >>
How to assemble and debug door and window aluminum profiles? How to assemble and debug door and window aluminum profiles?
Jul .28.2023
The assembly and debugging of door and window aluminum profiles is one of the key links in the process of making doors and windows.
How to do a good job of cleaning industrial aluminum profiles? How to do a good job of cleaning industrial aluminum profiles?
Jul .17.2023
Spraying cleaning method of industrial aluminum profiles is widely used, because of complex equipment, high process requirements, poor cleaning effect, then how to better do spray cleaning of industrial aluminum profiles?
Aluminum extrusion profile six places are required during the stretching process Aluminum extrusion profile six places are required during the stretching process
Jul .07.2023
The aluminum extrusion profile must be cooled to below 50 degrees before stretching. If the temperature is too high, stretching will not only burn the human body, the hair belt, but also expose absolute waste products such as bending, twisting, and poor performance before and after aging, because the stress in the aluminum alloy profile can not be completely eliminated.
Curtain wall aluminum profile purchase mainly see where? Curtain wall aluminum profile purchase mainly see where?
Jul .06.2023
Appearance quality of curtain wall aluminum profile: the surface of anodic oxide film is not allowed to have electrical burns, oxide film falling off and other defects; Electrophoretic, powder, fluorocarbon profile paint film should be uniform, neat, smooth, do not allow wrinkles, cracks, bubbles, flow signs, inclusions and paint film fall off and other defects, but allow local film within 80 mm at the end of the profile.