Company News

These details need to be taken care of to ensure the strength of the aluminum profile

Views : 70
Update time : 2022-11-22 10:02:43
With its own excellent characteristics, aluminum profiles are used by many industries, which do not have high requirements for aluminum profiles. Under the condition of maintaining the original advantages, it is OK to reach the strength they need in hardness, but not all aluminum profiles can meet the requirements after being produced. So how can we ensure the hardness of the production of aluminum profiles?
1. Aluminum profile temperature setting and control. Usually, there is a certain error between the internal temperature of aluminum profiles and the temperature measured on the surface during production, so we should try our best to set the table temperature according to the actual temperature of the furnace when we test the temperature, and pay close attention to the temperature fluctuations.
2. Insulation of aluminum profiles. For the temperature protection of aluminum profiles during production, the effect of thermal insulation should be carried out in strict accordance with the requirements of the production process. The thermal insulation time should be slightly more than the requirements of the production process, of course, only slightly more than, can not be exceeded for a long time. After all, if the thermal insulation time is too long, it will lead to the hardness of aluminum profiles is not enough.
3. Do not place aluminum extrusion frames too close to each other. There should be an interval between the material and the material. The interval between the unventilated small material and the thick material should be properly increased. When the pipeline material and the small material and the plate material are used together, the pipeline material should be placed under the assembly as far as possible, which is conducive to the circulation of air supply.
4. Before loading, other special alloys and ordinary 6063 alloys should be aged separately. Due to production reasons, it is really necessary to age with the furnace, so special alloy process should be adopted for aging. Aluminum profile is produced by aluminum profile, before aging hardness is low, can not be used as a finished product, so generally must go through aging to improve the strength.
Related News
Read More >>
How to assemble and debug door and window aluminum profiles? How to assemble and debug door and window aluminum profiles?
Jul .28.2023
The assembly and debugging of door and window aluminum profiles is one of the key links in the process of making doors and windows.
How to do a good job of cleaning industrial aluminum profiles? How to do a good job of cleaning industrial aluminum profiles?
Jul .17.2023
Spraying cleaning method of industrial aluminum profiles is widely used, because of complex equipment, high process requirements, poor cleaning effect, then how to better do spray cleaning of industrial aluminum profiles?
Aluminum extrusion profile six places are required during the stretching process Aluminum extrusion profile six places are required during the stretching process
Jul .07.2023
The aluminum extrusion profile must be cooled to below 50 degrees before stretching. If the temperature is too high, stretching will not only burn the human body, the hair belt, but also expose absolute waste products such as bending, twisting, and poor performance before and after aging, because the stress in the aluminum alloy profile can not be completely eliminated.
Curtain wall aluminum profile purchase mainly see where? Curtain wall aluminum profile purchase mainly see where?
Jul .06.2023
Appearance quality of curtain wall aluminum profile: the surface of anodic oxide film is not allowed to have electrical burns, oxide film falling off and other defects; Electrophoretic, powder, fluorocarbon profile paint film should be uniform, neat, smooth, do not allow wrinkles, cracks, bubbles, flow signs, inclusions and paint film fall off and other defects, but allow local film within 80 mm at the end of the profile.