Industry News

The specific introduction of aluminum alloy profiles

Update time : 2022-11-02 19:29:47

Industrial machinery aluminum profile is an alloy material with aluminum as the main component. Aluminum rods are hot-melted and extruded to obtain aluminum materials with different cross-sectional shapes. However, the proportion of the added alloy is different, and the mechanical properties of the produced industrial aluminum profiles are and application areas are also different. Fields of application generally speaking, industrial aluminum profiles refer to all aluminum profiles except for building doors and windows, curtain walls, interior and exterior decoration and aluminum profiles for building structures.After the surface of industrial machinery aluminum profile is oxidized, it is anti-corrosion, free of spraying, very beautiful in appearance, and resistant to dirt. Once coated with oil, it is very easy to clean and increase the added value of the product. When assembling into a product, different specifications of profiles are used according to different load-bearing, and matching aluminum profile accessories are used, which does not require welding, which is more environmentally friendly, and is light and easy to carry and move to install and disassemble.

Aluminum alloy profiles are also constantly developing, both production and processing techniques have been improved, keeping pace with the development of the machinery manufacturing industry and even promoting each other.

Previous : What are the characteristics of swing doors and the benefits of aluminum profile for swing door?

Next : Is it good to choose aluminum alloy profiles for the motor housing?

How to assemble and debug door and window aluminum profiles?

Jul .28.2023

The assembly and debugging of door and window aluminum profiles is one of the key links in the process of making doors and windows.

How to do a good job of cleaning industrial aluminum profiles?

Jul .17.2023

Spraying cleaning method of industrial aluminum profiles is widely used, because of complex equipment, high process requirements, poor cleaning effect, then how to better do spray cleaning of industrial aluminum profiles?

Aluminum extrusion profile six places are required during the stretching process

Jul .07.2023

The aluminum extrusion profile must be cooled to below 50 degrees before stretching. If the temperature is too high, stretching will not only burn the human body, the hair belt, but also expose absolute waste products such as bending, twisting, and poor performance before and after aging, because the stress in the aluminum alloy profile can not be completely eliminated.

Curtain wall aluminum profile purchase mainly see where?

Jul .06.2023

Appearance quality of curtain wall aluminum profile: the surface of anodic oxide film is not allowed to have electrical burns, oxide film falling off and other defects; Electrophoretic, powder, fluorocarbon profile paint film should be uniform, neat, smooth, do not allow wrinkles, cracks, bubbles, flow signs, inclusions and paint film fall off and other defects, but allow local film within 80 mm at the end of the profile.

Hammy Han