Industry News

The reason of color difference in aluminum profile electrolysis coloring?

Update time : 2022-10-11 18:53:10

Electrolytic coloring of aluminum profiles has good decoration, so it is widely used, especially in the surface treatment production of architectural aluminum profiles. At present, the main process is the use of tin-nickel mixed salt electrolytic coloring, the product color produced is mainly champagne color, compared with the single nickel salt coloring, tin-nickel mixed salt electrolytic coloring products bright color, full color; The main problem is that there is color difference in the product. The unreasonable extrusion process and oxidation coloring process in the production process of aluminum profile will lead to color difference in the product.

Electrolytic coloring process can directly reflect the color difference problem, electrolytic coloring liquid current distribution ability has a decisive influence on the uniform coloring material, once the current distribution is uneven, it will cause obvious color difference. The current distribution ability of the tank is mainly related to the conductivity and polarization of the tank. The coloring solution contains a certain conductive salt, mainly to improve the conductivity of the coloring solution, when the conductive salt is not added in time, the conductive ability decreases, the current distribution ability decreases, will cause color difference. In addition, the additives in the coloring solution will produce characteristics of adsorption, thus increasing the polarization, the material consumption is too much, will make the electrolyte polarization decreased, the current distribution ability decreased, will also cause color difference. In the actual production, not only to improve the conductivity of the trough, but also to ensure that the conductive rod, copper base has good conductivity, poor conductivity will cause uneven distribution of power lines, resulting in color difference.

Anodic oxidation and electrolytic coloring of the change of process parameters will cause the color difference between different tank materials, so in the production to control the stability of oxidation and coloring process, to ensure that the parameters are consistent, so as to reduce the appearance of the color difference problem of oxidation coloring materials.

Previous : The future development of aluminum alloy in shipbuilding industry

Next : What are special shaped aluminum profiles?

How to assemble and debug door and window aluminum profiles?

Jul .28.2023

The assembly and debugging of door and window aluminum profiles is one of the key links in the process of making doors and windows.

How to do a good job of cleaning industrial aluminum profiles?

Jul .17.2023

Spraying cleaning method of industrial aluminum profiles is widely used, because of complex equipment, high process requirements, poor cleaning effect, then how to better do spray cleaning of industrial aluminum profiles?

Aluminum extrusion profile six places are required during the stretching process

Jul .07.2023

The aluminum extrusion profile must be cooled to below 50 degrees before stretching. If the temperature is too high, stretching will not only burn the human body, the hair belt, but also expose absolute waste products such as bending, twisting, and poor performance before and after aging, because the stress in the aluminum alloy profile can not be completely eliminated.

Curtain wall aluminum profile purchase mainly see where?

Jul .06.2023

Appearance quality of curtain wall aluminum profile: the surface of anodic oxide film is not allowed to have electrical burns, oxide film falling off and other defects; Electrophoretic, powder, fluorocarbon profile paint film should be uniform, neat, smooth, do not allow wrinkles, cracks, bubbles, flow signs, inclusions and paint film fall off and other defects, but allow local film within 80 mm at the end of the profile.

Hammy Han