Industry News

The common reason for the short service life of aluminum framing extrusion

Update time : 2022-12-01 18:53:43

Because the industrial aluminum has the characteristics of light weight, beautiful, environmental protection, corrosion resistance, wear resistance and so on, it is widely used in the industrial assembly line workbench, workshop equipment protective cover, workshop fence partition and other equipment frame, especially in some highly automated workshops, the protective fence and equipment frame made of industrial aluminum profile is not only beautiful and practical, but also convenient to install and move. Therefore, more and more industries and individuals choose industrial aluminum profiles. But in daily use, there are also some customer feedback aluminum framing extrusion structure service life is not ideal, so what is the common reason for the short service life of aluminum framing extrusion?

1. Selection problem

When designing aluminum framing extrusion, it does not strictly comply with the actual environment and requirements. A small load-bearing aluminum extrusion is selected, and the load in actual use far exceeds the load-bearing standard of the design. This leads to aluminum framing extrusion service life becomes short;

2. Design structure problems

Aluminum framing extrusion is made from a combination of different specifications of profiles and accessories. When designing, it is necessary to consider the load balance, the upper limit of the key parts, and the reasonable use of light and heavy aluminum profiles.

3. Aluminum profile fittings

Although aluminum profile accessories look insignificant, but small parts have a big role, special industrial aluminum profile accessories usually have special irreplaceable, must be strictly in accordance with the actual needs to avoid the use of substitutes;

4. Installation technical problems

Industrial aluminum framing extrusion is made of a combination of profiles and accessories. In addition to the need for professional installation, the tool used during installation is also very important, and the use of professional tools can be guaranteed.

Previous : Why do people like to build sunrooms with thermal break aluminum profiles?

Next : Technical requirements for aluminum radiator profiles extrusion

How to assemble and debug door and window aluminum profiles?

Jul .28.2023

The assembly and debugging of door and window aluminum profiles is one of the key links in the process of making doors and windows.

How to do a good job of cleaning industrial aluminum profiles?

Jul .17.2023

Spraying cleaning method of industrial aluminum profiles is widely used, because of complex equipment, high process requirements, poor cleaning effect, then how to better do spray cleaning of industrial aluminum profiles?

Aluminum extrusion profile six places are required during the stretching process

Jul .07.2023

The aluminum extrusion profile must be cooled to below 50 degrees before stretching. If the temperature is too high, stretching will not only burn the human body, the hair belt, but also expose absolute waste products such as bending, twisting, and poor performance before and after aging, because the stress in the aluminum alloy profile can not be completely eliminated.

Curtain wall aluminum profile purchase mainly see where?

Jul .06.2023

Appearance quality of curtain wall aluminum profile: the surface of anodic oxide film is not allowed to have electrical burns, oxide film falling off and other defects; Electrophoretic, powder, fluorocarbon profile paint film should be uniform, neat, smooth, do not allow wrinkles, cracks, bubbles, flow signs, inclusions and paint film fall off and other defects, but allow local film within 80 mm at the end of the profile.

Hammy Han