Industry News

Is it good to choose motor housing aluminum extrusions for the motor housing?

Update time : 2022-10-20 19:11:46

The material used for the aluminum shell motor is motor housing aluminum extrusions, which are divided into water-cooled motors and air-cooled motors. The aluminum alloy water-cooled motor shell takes away almost all the heat generated when the motor is running through the cooling water that circulates continuously in the interlayer of the shell, so as to achieve the effect that the motor hardly emits heat to the outside world; because the aluminum alloy water-cooled motor the shell has such a significant cooling effect, so we have omitted the cooling fan that comes with the traditional motor itself, which can not only reduce the noise caused by the motor, but also improve the efficiency of the motor, so that the electricity consumed by the motor itself can be effectively used. Down, the motor runs for a long time, it can bring you very considerable economic benefits; motor housing aluminum extrusions, its advantages are light weight, good heat dissipation, good thermal conductivity, can be extruded and die-cast, good plasticity, high elongation Iron, low noise, good operation stability.

1. Good heat dissipation: During the working process of the motor, due to the high-speed operation of the motor, the high temperature generated by the motor itself needs to be released. We know that the heat capacity of aluminum is very strong, so the current motor manufacturers have to choose motor housing aluminum extrusions as the motor housing.

2. Make the motor lighter: The weight of metal aluminum is lighter, and the weight of the whole machine can be reduced. Easy to install and carry.

3. Good plasticity: Motor housing aluminum extrusions are lighter in weight than steel, have good thermal conductivity, good plasticity, can be die cast and have higher elongation than iron.

4. Aluminum alloy motor housing the motor is light in weight, low in vibration, low in noise, and has the characteristics of waterproof, dustproof, anticorrosion, energy saving, high performance and long service life. It is a new environmentally friendly product that cannot be replaced by ordinary motors.

Previous : What are the advantages of aluminum folding door?

Next : More and more parts of modern industrial machinery and equipment are replaced by aluminum profiles

How to assemble and debug door and window aluminum profiles?

Jul .28.2023

The assembly and debugging of door and window aluminum profiles is one of the key links in the process of making doors and windows.

How to do a good job of cleaning industrial aluminum profiles?

Jul .17.2023

Spraying cleaning method of industrial aluminum profiles is widely used, because of complex equipment, high process requirements, poor cleaning effect, then how to better do spray cleaning of industrial aluminum profiles?

Aluminum extrusion profile six places are required during the stretching process

Jul .07.2023

The aluminum extrusion profile must be cooled to below 50 degrees before stretching. If the temperature is too high, stretching will not only burn the human body, the hair belt, but also expose absolute waste products such as bending, twisting, and poor performance before and after aging, because the stress in the aluminum alloy profile can not be completely eliminated.

Curtain wall aluminum profile purchase mainly see where?

Jul .06.2023

Appearance quality of curtain wall aluminum profile: the surface of anodic oxide film is not allowed to have electrical burns, oxide film falling off and other defects; Electrophoretic, powder, fluorocarbon profile paint film should be uniform, neat, smooth, do not allow wrinkles, cracks, bubbles, flow signs, inclusions and paint film fall off and other defects, but allow local film within 80 mm at the end of the profile.

Hammy Han