Company News

Introduction of common technology for surface treatment of aluminum

Update time : 2022-08-26 11:54:12

In recent years, the application of aluminum alloy profiles in our lives has become more and more common. The subsequent processing of aluminum profiles is indispensable for the development of the surface treatment process. If the surface treatment process cannot be carried out smoothly, it will affect the quality of the aluminum profiles. What are the surface treatment processes that are often used for aluminum profiles? Let's introduce the three most widely used surface treatment processes.

1. Electrophoretic coating: On the basis of anodic oxidation, through the action of electrophoresis, a layer of water-soluble acrylic paint film is evenly covered on the oxide film, so that the surface of the profile forms a composite film of anodized film and acrylic paint film. The hand feels smooth and delicate, and the appearance is bright and bright. In addition to the original oxidation coloring color, it can also make more bright colors such as white and green.

2. Color powder coating: a total of more than 200 color options, stable performance, strong paint film adhesion, not easy to peel off, acid resistance, salt spray resistance, weather resistance, aging resistance and other properties. The coating is non-volatile, non-oxidizing and toxic in the air, and has good environmental protection performance.

3. Color fluorocarbon spraying: spray the polyvinylidene fluoride paint coating on the surface of the aluminum alloy substrate by electrostatic action. Fluorocarbon coatings are polyvinylidene fluoride and fluorocarbon coatings. Therefore, it can have the advantages of long-lasting color retention, corrosion resistance, and air pollution resistance. Its fluorocarbon bond is one of the strong molecular bonds in its polymerized molecular structure. As a surface treatment method, fluorocarbon spraying has the advantages of uniform color and resistance to fading and contamination.

Previous : What are the main structures of aluminum doors and windows!

Next : Why do adsorption particles appear in the extrusion process of aluminum profiles

How to assemble and debug door and window aluminum profiles?

Jul .28.2023

The assembly and debugging of door and window aluminum profiles is one of the key links in the process of making doors and windows.

How to do a good job of cleaning industrial aluminum profiles?

Jul .17.2023

Spraying cleaning method of industrial aluminum profiles is widely used, because of complex equipment, high process requirements, poor cleaning effect, then how to better do spray cleaning of industrial aluminum profiles?

Aluminum extrusion profile six places are required during the stretching process

Jul .07.2023

The aluminum extrusion profile must be cooled to below 50 degrees before stretching. If the temperature is too high, stretching will not only burn the human body, the hair belt, but also expose absolute waste products such as bending, twisting, and poor performance before and after aging, because the stress in the aluminum alloy profile can not be completely eliminated.

Curtain wall aluminum profile purchase mainly see where?

Jul .06.2023

Appearance quality of curtain wall aluminum profile: the surface of anodic oxide film is not allowed to have electrical burns, oxide film falling off and other defects; Electrophoretic, powder, fluorocarbon profile paint film should be uniform, neat, smooth, do not allow wrinkles, cracks, bubbles, flow signs, inclusions and paint film fall off and other defects, but allow local film within 80 mm at the end of the profile.

Hammy Han