Industry News

How to produce aluminum profile, how to deal with the oxidation problem?

Update time : 2022-11-30 19:30:38

Aluminum profile belongs to the common processing products, do you understand its production process?

1. Cast

The molten aluminum is cooled and cast into round rods of various specifications by deep well casting system under corresponding casting process conditions.

2. Squeeze

Firstly, according to the section of the profile product, the mold is designed and manufactured, and the heated round casting rod is extruded from the mold by the extruder. An air cooling quenching process followed by an artificial aging process is also used during extrusion to complete the heat treatment strengthening.

3. Color and oxidize

The surface corrosion resistance of the extruded aluminum alloy profile is not strong, and the surface treatment must be carried out by anodic oxidation to increase the corrosion resistance, wear resistance and appearance of the aluminum.

Notes on aluminum profile oxidation

1. Rinse with hot water

The purpose of hot water washing is to aging the film, the appropriate temperature is 40 ~ 50℃, the time is 0.5 ~ 1MIN.

2. Dry

It is better to dry naturally. The workpiece of filling barley flushed with hot water is hung slanted on the shelf, so that the free water on the working surface flows down in a vertical direction.

3. Aging

According to the climate conditions to decide, there is daylight in the summer can be exposed in the sun, rainy days or winter available oven baking.

4. Repair of unqualified parts

Unqualified conductive oxide film parts should be picked out before drying and aging process to avoid affecting the roughness of the workpiece surface.

Previous : What are the performance characteristics of aluminum composite panels?

Next : Aluminum profile development trend and related knowledge introduction

How to assemble and debug door and window aluminum profiles?

Jul .28.2023

The assembly and debugging of door and window aluminum profiles is one of the key links in the process of making doors and windows.

How to do a good job of cleaning industrial aluminum profiles?

Jul .17.2023

Spraying cleaning method of industrial aluminum profiles is widely used, because of complex equipment, high process requirements, poor cleaning effect, then how to better do spray cleaning of industrial aluminum profiles?

Aluminum extrusion profile six places are required during the stretching process

Jul .07.2023

The aluminum extrusion profile must be cooled to below 50 degrees before stretching. If the temperature is too high, stretching will not only burn the human body, the hair belt, but also expose absolute waste products such as bending, twisting, and poor performance before and after aging, because the stress in the aluminum alloy profile can not be completely eliminated.

Curtain wall aluminum profile purchase mainly see where?

Jul .06.2023

Appearance quality of curtain wall aluminum profile: the surface of anodic oxide film is not allowed to have electrical burns, oxide film falling off and other defects; Electrophoretic, powder, fluorocarbon profile paint film should be uniform, neat, smooth, do not allow wrinkles, cracks, bubbles, flow signs, inclusions and paint film fall off and other defects, but allow local film within 80 mm at the end of the profile.

Hammy Han