Company News

How to prevent motor housing aluminum extrusions scrap phenomenon?

Views : 107
Update time : 2022-12-15 19:13:43
Most electronic products today are made of aluminum, aluminum alloy shell has become one of the mainstream products of the electronic industry, the shell of different products have different quality, the quality of motor housing aluminum extrusions is very important to customers, many manufacturers in motor housing aluminum the phenomenon of product scrap is easy to occur in extrusions processing, so how can we prevent this phenomenon?
1. Squeeze and straighten
Straightening is a very important link in the production process of motor housing aluminum extrusions. Too much strength may cause deformation, closing, orange peel and other problems on aluminum profile; Too little force may not be straightened, resulting in bending. So be sure to get the intensity right.
2. Squeeze the frame
This link is also very important, after the length of the saw, the aluminum profile will be framed. The fashion frame workers should pay attention to: this material is aniseed or small material, is the material with tube or plane mold pulled out of the material, generally speaking, aniseed and tube material lifting the two ends of the frame is not easy to cause bending, but small material and plane mold pulled out of the material, lifting the two ends is easy to cause bending, then it should be from the two ends to the middle of the frame. But some aluminum profiles even if this is not enough, such as: louvers, Windows, gland, etc., it is necessary to put this kind of material on the aging aluminum profile and then lift to the frame.
3. Surface treatment shelf
Billet after aging, hardness standards, so the aluminum profile is not so easy to bend, but it is still necessary to pay attention to the shelf, both ends of the material lifting, try to avoid up and down strong fluctuations, strong fluctuations will also cause a certain bending of the aging aluminum profile housing.
Motor housing aluminum extrusions manufacturers should pay more attention to the above three points in processing. Compared with plastic shell, motor housing aluminum extrusions has simple processing and good hardness, which exceeds the strength of many plastics and metal. The future development prospect is very considerable. Pay attention to the relevant details in processing, improve product quality and prevent the appearance of scrap phenomenon.
Related News
Read More >>
How to assemble and debug door and window aluminum profiles? How to assemble and debug door and window aluminum profiles?
Jul .28.2023
The assembly and debugging of door and window aluminum profiles is one of the key links in the process of making doors and windows.
How to do a good job of cleaning industrial aluminum profiles? How to do a good job of cleaning industrial aluminum profiles?
Jul .17.2023
Spraying cleaning method of industrial aluminum profiles is widely used, because of complex equipment, high process requirements, poor cleaning effect, then how to better do spray cleaning of industrial aluminum profiles?
Aluminum extrusion profile six places are required during the stretching process Aluminum extrusion profile six places are required during the stretching process
Jul .07.2023
The aluminum extrusion profile must be cooled to below 50 degrees before stretching. If the temperature is too high, stretching will not only burn the human body, the hair belt, but also expose absolute waste products such as bending, twisting, and poor performance before and after aging, because the stress in the aluminum alloy profile can not be completely eliminated.
Curtain wall aluminum profile purchase mainly see where? Curtain wall aluminum profile purchase mainly see where?
Jul .06.2023
Appearance quality of curtain wall aluminum profile: the surface of anodic oxide film is not allowed to have electrical burns, oxide film falling off and other defects; Electrophoretic, powder, fluorocarbon profile paint film should be uniform, neat, smooth, do not allow wrinkles, cracks, bubbles, flow signs, inclusions and paint film fall off and other defects, but allow local film within 80 mm at the end of the profile.