Industry News

How to operate the degreasing steps of industrial aluminum profiles?

Views : 98
Update time : 2022-09-09 18:50:12
Degreasing is an important step in the processing of industrial aluminum profiles. If the surface degreasing is not clean, it will be difficult to carry out subsequent processing work. All kinds of oil stains, residual polishing paste, hand imprints, oil seals, surface waxes, etc. contaminated by aluminum profiles during stamping, turning, milling and other processing need to be removed. The following aluminum profiles introduce several common degreasing methods.
1. Organic solvent
The organic solvent has a strong dissolving effect on both saponified oil and non-saponified oil, and can remove the marking symbols and residual polishing paste on the surface of the workpiece. The erasing methods mainly include scrubbing, dipping, spraying, and ultrasonic cleaning. Ultrasonic cleaning has the characteristics of high efficiency and good oil removal effect, especially for some workpieces with complex shapes and pores that are not easy to clean.
2. Chemical degreasing
Chemical degreasing is used to remove invisible oil stains, surface dust, traces of anti-rust layers and some minor contaminants formed during transportation or production. Chemical degreasing includes alkaline chemical degreasing and acid chemical degreasing. It does not require heating and can achieve good degreasing effect at normal temperature. If it is heated to about 40 ℃, the degreasing effect can be significantly improved. When degreasing at room temperature, the working cylinder can be made of hard PVC, and it should be made of PP when heating and degreasing.
3. Electrolytic oil removal
Alkaline electrolysis is rarely used in the degreasing treatment of aluminum profiles, because this type of cleaning treatment has a large erosive effect on the surface of the parts, and the equipment investment is also large.
Related News
Read More >>
How to assemble and debug door and window aluminum profiles? How to assemble and debug door and window aluminum profiles?
Jul .28.2023
The assembly and debugging of door and window aluminum profiles is one of the key links in the process of making doors and windows.
How to do a good job of cleaning industrial aluminum profiles? How to do a good job of cleaning industrial aluminum profiles?
Jul .17.2023
Spraying cleaning method of industrial aluminum profiles is widely used, because of complex equipment, high process requirements, poor cleaning effect, then how to better do spray cleaning of industrial aluminum profiles?
Aluminum extrusion profile six places are required during the stretching process Aluminum extrusion profile six places are required during the stretching process
Jul .07.2023
The aluminum extrusion profile must be cooled to below 50 degrees before stretching. If the temperature is too high, stretching will not only burn the human body, the hair belt, but also expose absolute waste products such as bending, twisting, and poor performance before and after aging, because the stress in the aluminum alloy profile can not be completely eliminated.
Curtain wall aluminum profile purchase mainly see where? Curtain wall aluminum profile purchase mainly see where?
Jul .06.2023
Appearance quality of curtain wall aluminum profile: the surface of anodic oxide film is not allowed to have electrical burns, oxide film falling off and other defects; Electrophoretic, powder, fluorocarbon profile paint film should be uniform, neat, smooth, do not allow wrinkles, cracks, bubbles, flow signs, inclusions and paint film fall off and other defects, but allow local film within 80 mm at the end of the profile.