Industry News

How to make the surface of aluminum profile smooth and beautiful?

Update time : 2022-10-13 19:35:25

How to achieve the beautiful appearance and smooth surface of the aluminum profiles we usually see?

Aluminum profile surface treatment

1. During the extrusion process of industrial aluminum profiles, if the extrusion die is not very good or the die extrudes too many industrial aluminum profiles, extrusion marks will occur on the surface of the industrial aluminum profiles, and the surface of the industrial aluminum profiles may be touched by hand. To make the appearance of the industrial aluminum profile smooth and flat, and no extrusion marks can be felt. The industrial aluminum profile factory generally erodes with alkaline water first to erode the extrusion marks.

2. Industrial aluminum profiles are required to have good sealing properties as external protective components. At present, powder electrostatic spraying has become a popular trend in the exterior coating of industrial aluminum profiles at home. In particular, the area of the opening part of the glass industry aluminum profile should not be greater than 15% of the area of the curtain wall; and the opening part should adopt an upper hanging structure, and the opening angle should not be greater than 45 degrees.

3. The combination of powder spraying and thermal transfer technology for industrial aluminum profiles will make it more fashionable, so that the powder sprayed profile applicator has more room for development.

4. Aluminum alloy profiles have high strength, light weight, strong stability, strong corrosion resistance, good plasticity, small deformation, non-polluting, non-toxic, strong fire resistance, and long service life (up to 50-100 years) Good recyclability, can be returned to the furnace for re-smelting.

Previous : Can the heating and cooling speed of aluminum profiles be too fast?

Next : How to control the extrusion temperature of aluminum profiles?

How to assemble and debug door and window aluminum profiles?

Jul .28.2023

The assembly and debugging of door and window aluminum profiles is one of the key links in the process of making doors and windows.

How to do a good job of cleaning industrial aluminum profiles?

Jul .17.2023

Spraying cleaning method of industrial aluminum profiles is widely used, because of complex equipment, high process requirements, poor cleaning effect, then how to better do spray cleaning of industrial aluminum profiles?

Aluminum extrusion profile six places are required during the stretching process

Jul .07.2023

The aluminum extrusion profile must be cooled to below 50 degrees before stretching. If the temperature is too high, stretching will not only burn the human body, the hair belt, but also expose absolute waste products such as bending, twisting, and poor performance before and after aging, because the stress in the aluminum alloy profile can not be completely eliminated.

Curtain wall aluminum profile purchase mainly see where?

Jul .06.2023

Appearance quality of curtain wall aluminum profile: the surface of anodic oxide film is not allowed to have electrical burns, oxide film falling off and other defects; Electrophoretic, powder, fluorocarbon profile paint film should be uniform, neat, smooth, do not allow wrinkles, cracks, bubbles, flow signs, inclusions and paint film fall off and other defects, but allow local film within 80 mm at the end of the profile.

Hammy Han