Industry News

How to maintain the curtain wall aluminum veneer?

Update time : 2022-08-18 18:23:06

Aluminum veneer refers to a building decoration material formed by chromating and other treatments, and then using fluorocarbon spraying technology. Fluorocarbon coatings mainly refer to polyvinylidene fluoride resins, which are divided into three types: primer, topcoat and varnish.

Aluminum veneer can be used not only for outdoor decoration but also for indoor walls, ceilings, partitions, columns, beams, balconies, door covers, window sills, counters, billboards, even screens and handicrafts and other decorations.

In modern decoration projects, aluminum veneer is often widely used in curtain wall decoration. Regular maintenance of the aluminum veneer curtain wall in use can not only make the aluminum veneer curtain wall show the beauty of the building for a long time, but also increase the service life of the aluminum veneer curtain wall. So how to maintain the aluminum veneer curtain wall?

The surface of the aluminum veneer curtain wall is sprayed with fluorocarbon paint, which can maintain a bright color for a long time, dust and pollutants are not easy to adhere to the surface, and have strong self-cleaning properties, so they are generally not cleaned.

If there are stains that need to be cleaned, use a soft cloth with water or a mild detergent. Do not use ordinary soaps and washing powders, and do not use strong acid-base cleaners, such as decontamination powders and detergents, which will corrode the surface of the profile.

The maintenance of the aluminum veneer curtain wall is mainly to check the tightness between the panels. The sealing between the plates mainly relies on the sealing strip and the glass glue. If it falls off, it should be repaired and replaced in time.

Do not step on the aluminum or pull on the frame for support during repairs and replacements. In this way, it is easy to wear the aluminum veneer curtain wall or cause an accident. Joints between frames and walls should be checked frequently. If the screws at the joints are loose, they should be tightened immediately. If the screw feet are loose, they should be sealed with epoxy superglue and a small amount of cement.

Previous : What kinds of aluminum workbenches are there?

Next : Industrial aluminum profile frame advantages

LED aluminum profile processing how to grasp machining accuracy

May .26.2023

A little more complex metal workpiece needs processing center to process, its high degree of automation, just set the program parameters on the machine, put on the embryo, you can automatically process. This greatly reduces labor and ensures error. Machine processing of LED aluminum profile size will be more accurate.

How are general aluminum profiles produced

May .25.2023

General aluminum profiles can be seen everywhere in our life, but most people do not know how to ask general aluminum profiles is produced. Below we understand the production process of general aluminum profiles.

What are the aluminum extrusion profile processing ways?

May .10.2023

Aluminum extrusion profile is extruded, which can be divided into cold extrusion and hot extrusion. Most common aluminum extrusion profiles are hot extrusion aluminum, hot extrusion process is relatively simple, the technical content is not high.

What errors do industrial aluminum profiles have to pay attention to?

May .09.2023

Industrial aluminum profiles for the automation equipment industry with higher precision requirements, the accuracy error of 1mm may cause unqualified equipment.

Hammy Han