Industry News

How to maintain the aluminum profile frame to extend the service life?

Update time : 2022-10-26 19:37:49

The aluminum profile frame is favored by everyone because of its long service life and smooth surface appearance. Now when we customize a frame, we all choose aluminum profiles to make. Now, whether it is the production of shelves and transportation lines in the production workshop, or the customization of glass door frames and windows at home, aluminum profiles are inseparable. However, although the aluminum profile has a long life and a more beautiful appearance, it will be stained with some other stains and gray layers after being used for a long time. So, how can it be maintained in daily use, and how can the aluminum profile be kept clean and smooth all the time?

First of all, from the perspective of the degree of stains, if there is a layer of dust and oil stains on the aluminum profile shelf if it is not cleaned for a short time, then you only need to prepare a wet rag with detergent and detergent to clean it up.

If the aluminum profile is full of stubborn stains, and it has not been cleaned for a long time, the dust on it is difficult to remove, then wipe it with rosin, but be careful to protect it during the cleaning process, because rosin is a chemical agent, is toxic.

It should be noted that even if the stain is very thick, it cannot be cleaned with a hard brush, because the brush is very hard, it is easy to scratch the surface of the aluminum profile during the cleaning process, and damage its external anodized film, making it difficult to clean the aluminum profile product later. increase.

Especially when using aluminium profiles, check the stability of the connection points. Whether the bolts at the installation position of the aluminum profile are tightened and damaged. If it is not checked in time, it is easy to cause production accidents.

Previous : What is the difference between unitized aluminum curtain wall and frame curtain wall?

Next : Aluminum profiles are closely related to people's lives

How to assemble and debug door and window aluminum profiles?

Jul .28.2023

The assembly and debugging of door and window aluminum profiles is one of the key links in the process of making doors and windows.

How to do a good job of cleaning industrial aluminum profiles?

Jul .17.2023

Spraying cleaning method of industrial aluminum profiles is widely used, because of complex equipment, high process requirements, poor cleaning effect, then how to better do spray cleaning of industrial aluminum profiles?

Aluminum extrusion profile six places are required during the stretching process

Jul .07.2023

The aluminum extrusion profile must be cooled to below 50 degrees before stretching. If the temperature is too high, stretching will not only burn the human body, the hair belt, but also expose absolute waste products such as bending, twisting, and poor performance before and after aging, because the stress in the aluminum alloy profile can not be completely eliminated.

Curtain wall aluminum profile purchase mainly see where?

Jul .06.2023

Appearance quality of curtain wall aluminum profile: the surface of anodic oxide film is not allowed to have electrical burns, oxide film falling off and other defects; Electrophoretic, powder, fluorocarbon profile paint film should be uniform, neat, smooth, do not allow wrinkles, cracks, bubbles, flow signs, inclusions and paint film fall off and other defects, but allow local film within 80 mm at the end of the profile.

Hammy Han