Company News

How to maintain aluminum extrusion profile during use?

Update time : 2022-12-05 18:34:26

Aluminum extrusion profile literally is not difficult to understand, is an essential part of the use in the industrial field, in the usual maintenance stage should master what the right way to help, is an important means to ensure the use of quality progress. We are a manufacturer focusing on aluminum extrusion profile and a full set of deep processing line to support diversified processing services of aluminum products.

First, use a soft brush for brush testing

If the appearance of aluminum extrusion profile encounters some impurities or dusty stains in the process of using aluminum extrusion profile, it is best to use a soft brush to brush and test. The reason is that the traditional steel wire ball is relatively large in hardness, and the sharp state is very easy to cause multiple scratches on the appearance. In order to reduce the damage in this respect, the use of towels or soft objects to help brush, to reduce the chance of scratches, protect aluminum profiles and other aspects have been greatly improved.

Second, warm water wiping method

Warm water can not only be strong in decontamination ability, but also reduce the number of friction for industrial aluminum profiles, which is an important link to protect materials from damage. It is also the best technique in the process of removing the stain above, which is well liked and recognized by everyone. Warm and hot water compared to lower temperature, while avoid burning the outer protective layer, affecting the quality and effect of the material.

The use and maintenance of aluminum extrusion profile is worth paying attention to, and it is an ideal choice to apply through these techniques in the future.

Previous : What uses of aluminum extrusion profile should be concerned about and selected?

Next : Motor housing aluminum extrusions how to remove oil stains?

How to assemble and debug door and window aluminum profiles?

Jul .28.2023

The assembly and debugging of door and window aluminum profiles is one of the key links in the process of making doors and windows.

How to do a good job of cleaning industrial aluminum profiles?

Jul .17.2023

Spraying cleaning method of industrial aluminum profiles is widely used, because of complex equipment, high process requirements, poor cleaning effect, then how to better do spray cleaning of industrial aluminum profiles?

Aluminum extrusion profile six places are required during the stretching process

Jul .07.2023

The aluminum extrusion profile must be cooled to below 50 degrees before stretching. If the temperature is too high, stretching will not only burn the human body, the hair belt, but also expose absolute waste products such as bending, twisting, and poor performance before and after aging, because the stress in the aluminum alloy profile can not be completely eliminated.

Curtain wall aluminum profile purchase mainly see where?

Jul .06.2023

Appearance quality of curtain wall aluminum profile: the surface of anodic oxide film is not allowed to have electrical burns, oxide film falling off and other defects; Electrophoretic, powder, fluorocarbon profile paint film should be uniform, neat, smooth, do not allow wrinkles, cracks, bubbles, flow signs, inclusions and paint film fall off and other defects, but allow local film within 80 mm at the end of the profile.

Hammy Han