Industry News

How to judge the quality of the partition aluminum profile?

Update time : 2022-11-16 18:44:44

Partition aluminum profile, its structure is two sides of aluminum, the middle is made of plastic, this new material, combined with plastic and aluminum alloy these two advantages, at the same time has the decorative effect, and more aging resistance and so on.

Partition aluminum profile most used for doors and windows, help doors and windows to achieve three seal structure, reasonable separation of water vapor cavity, successfully let the balance of gas and water pressure, improve the watertightness and airtightness of doors and windows.

In addition, through the strip connection, partition aluminum profile oxidation into silver white material and color spray paint, and sand fabric colored material connection, increase the decorative sense of profiles.

Poor quality partition aluminum profile products, shoddy manufacturing, very affect the overall relationship, but also have an impact on human health, how to identify the quality of partition aluminum profile?

1. Observe the surface of the profile

The quality is good, the surface of the partition aluminum profile can be seen, the surface of the general good partition aluminum profile is glossy and textured, the color sprayed on the surface is also treated naturally, see the past is very smooth feeling.

If the quality of the partition aluminum profile, the surface is certainly not shiny, rough, and the color does not look natural, after a period of time, the spray color will change color, become less beautiful and full.

2. Section structure of profile

Good partition aluminum profile after the geometric angle is very accurate, there will be no bending or twisting, it looks like the angle is very positive, its thickness is also very appropriate.

Previous : The powerful properties of door and window aluminum profiles make them highly applied

Next : Application of industrial aluminum profile in automobile industry

How to assemble and debug door and window aluminum profiles?

Jul .28.2023

The assembly and debugging of door and window aluminum profiles is one of the key links in the process of making doors and windows.

How to do a good job of cleaning industrial aluminum profiles?

Jul .17.2023

Spraying cleaning method of industrial aluminum profiles is widely used, because of complex equipment, high process requirements, poor cleaning effect, then how to better do spray cleaning of industrial aluminum profiles?

Aluminum extrusion profile six places are required during the stretching process

Jul .07.2023

The aluminum extrusion profile must be cooled to below 50 degrees before stretching. If the temperature is too high, stretching will not only burn the human body, the hair belt, but also expose absolute waste products such as bending, twisting, and poor performance before and after aging, because the stress in the aluminum alloy profile can not be completely eliminated.

Curtain wall aluminum profile purchase mainly see where?

Jul .06.2023

Appearance quality of curtain wall aluminum profile: the surface of anodic oxide film is not allowed to have electrical burns, oxide film falling off and other defects; Electrophoretic, powder, fluorocarbon profile paint film should be uniform, neat, smooth, do not allow wrinkles, cracks, bubbles, flow signs, inclusions and paint film fall off and other defects, but allow local film within 80 mm at the end of the profile.

Hammy Han