Company News

How to identify aluminum profiles?

Update time : 2022-11-09 18:36:13

What is aluminum? Aluminum profiles are aluminum alloy materials with different section shapes obtained by hot melting and extrusion of aluminum alloy rods, collectively known as aluminum profiles.

With the increase of aluminum profile application scope, the production of aluminum profile manufacturers are more and more, but in the production of aluminum profile manufacturers are mixed, the quality level is not uniform, which requires us to have a pair of eyes to identify aluminum profiles.

Summarize the following methods to identify aluminum profiles to share with you:

1. Look at the surface of the aluminum profile

Aluminum alloy profile surface is smooth, uniform color, clean, neat, no cracks, peeling, corrosion and bubbles and other defects exist.

2. The thickness of oxide film on the surface of aluminum profile meets the standard

The surface thickness of aluminum alloy profiles is measured by eddy current thickness meter, and then compared with the industry standard to see whether it is within the industry standard range.

3. Corrosion resistance detection of aluminum profiles

Corrosion resistance of aluminum profiles seriously affects the service life of aluminum profiles. The corrosion resistance of aluminum profiles is tested by alkali drop test, that is, 10mg, 100g/L NaOH solution is dropped on the surface of aluminum profiles at 35 ° C ±1 ° C, and the droplets are visually observed until corrosion bubbles occur. The penetration time of the oxide film is calculated. The longer the time, the better the corrosion resistance is.

4. Test the hardness

The aluminum bar doped with waste aluminum extrudes the industrial aluminum profile with excessive impurities and high iron content, which will lead to black hair and dark, no luster, and more seriously, the hardness is not up to the standard. The 6063 has a hardness standard of 8-12HW for aluminum profiles, and the tensile strength and yield strength are also very high, which can be tested with a Vickers hardness tester.

Previous : Four points should be paid attention to in the process of aluminum profile oxidation post treatment

Next : Use and classification of aluminium profiles

How to assemble and debug door and window aluminum profiles?

Jul .28.2023

The assembly and debugging of door and window aluminum profiles is one of the key links in the process of making doors and windows.

How to do a good job of cleaning industrial aluminum profiles?

Jul .17.2023

Spraying cleaning method of industrial aluminum profiles is widely used, because of complex equipment, high process requirements, poor cleaning effect, then how to better do spray cleaning of industrial aluminum profiles?

Aluminum extrusion profile six places are required during the stretching process

Jul .07.2023

The aluminum extrusion profile must be cooled to below 50 degrees before stretching. If the temperature is too high, stretching will not only burn the human body, the hair belt, but also expose absolute waste products such as bending, twisting, and poor performance before and after aging, because the stress in the aluminum alloy profile can not be completely eliminated.

Curtain wall aluminum profile purchase mainly see where?

Jul .06.2023

Appearance quality of curtain wall aluminum profile: the surface of anodic oxide film is not allowed to have electrical burns, oxide film falling off and other defects; Electrophoretic, powder, fluorocarbon profile paint film should be uniform, neat, smooth, do not allow wrinkles, cracks, bubbles, flow signs, inclusions and paint film fall off and other defects, but allow local film within 80 mm at the end of the profile.

Hammy Han