Company News

How to deal with the surface of aluminum alloy door and window profiles?

Update time : 2022-08-19 12:38:28

Aluminum alloy doors and windows have become a popular trend in home decoration. Aluminum profiles will be used on aluminum alloy doors and windows, so what are aluminum profiles and what are the surface treatment methods for aluminum profiles?

Aluminum profiles are aluminum materials with different cross-sectional shapes obtained by hot melting and extrusion of aluminum rods. The production process of aluminum profiles mainly includes three processes: casting, extrusion and coloring. The surface of the machined aluminum radiator is surface treated to improve the corrosion resistance, wear resistance and beautiful appearance of aluminum.

The surface treatment methods of aluminum alloy door and window profiles are as follows:

1. Frosted fabric profiles: Frosted aluminum profiles avoid the disadvantage of light interference caused by bright aluminum profiles in certain environments and conditions in architectural decoration. Its surface is as thin and soft as brocade, which is very popular in the market, but the existing matte materials must be overcome the unevenness of the surface sand, and can see the lack of mold patterns.

2. Multi-tone surface treatment aluminum profiles: Now the monotonous silver white and brown can no longer meet the architects' good cooperation with exterior wall decorative bricks and exterior wall cream, new stainless steel color, champagne color, golden yellow, titanium gold, red stained glass such as series can add decorative effect. These profiles must be oxidized after chemical or mechanical polishing to good effect.

3. Electrophoretic painted aluminum profile: The surface of the electrophoretic painted profile is soft and can resist the acid rain erosion of cement and mortar.

4. Powder electrostatic spraying aluminum profiles: Powder electrostatic spraying profiles have excellent corrosion resistance, acid and alkali salt spray resistance is better than oxidation coloring profiles.

Previous : What is the knowledge of aluminum profiles for doors and windows?

Next : What are the reasons for the looseness of aluminum profile accessories?

How to assemble and debug door and window aluminum profiles?

Jul .28.2023

The assembly and debugging of door and window aluminum profiles is one of the key links in the process of making doors and windows.

How to do a good job of cleaning industrial aluminum profiles?

Jul .17.2023

Spraying cleaning method of industrial aluminum profiles is widely used, because of complex equipment, high process requirements, poor cleaning effect, then how to better do spray cleaning of industrial aluminum profiles?

Aluminum extrusion profile six places are required during the stretching process

Jul .07.2023

The aluminum extrusion profile must be cooled to below 50 degrees before stretching. If the temperature is too high, stretching will not only burn the human body, the hair belt, but also expose absolute waste products such as bending, twisting, and poor performance before and after aging, because the stress in the aluminum alloy profile can not be completely eliminated.

Curtain wall aluminum profile purchase mainly see where?

Jul .06.2023

Appearance quality of curtain wall aluminum profile: the surface of anodic oxide film is not allowed to have electrical burns, oxide film falling off and other defects; Electrophoretic, powder, fluorocarbon profile paint film should be uniform, neat, smooth, do not allow wrinkles, cracks, bubbles, flow signs, inclusions and paint film fall off and other defects, but allow local film within 80 mm at the end of the profile.

Hammy Han