Industry News

How to build industrial aluminum profiles, what are the assembly principles?

Update time : 2022-11-28 18:47:36

Industrial aluminum profile is a kind of material processed on the production line, which can be built into a variety of frame types for everyone to use.

1. Confirm the site of aluminum framing extrusion and choose the ground without slope to prevent aluminum framing extrusion from being scratched or damaged when it is built.

2. The processed aluminum profiles are classified and placed in order to take.

3. According to the drawings, the main body of aluminum framing extrusion is built from the bottom up. It is necessary to pay attention to the connection of aluminum framing extrusion.

4. Tighten the bolts and nuts with professional tools.

5. After the construction is completed, check whether the bolts and nuts are loose to avoid potential safety risks.

6. Once assembled, scrub the aluminum framing extrusion and clean the floor.

Requirement analysis of industrial aluminum profile assembly

1. Assemble from the bottom of the aluminum framing extrusion as a whole according to the drawing.

2. Prevent embedded nuts in the groove of the aluminum profile at the bottom.

3. Prevent aluminum framing extrusion bearing column, fixed with accessories.

4. Choose the built-in connector or other internal connection of aluminum profile accessories corner connection.

5. When installing the plate, pay attention to the plate should be placed in the groove of the aluminum profile in parallel.

6. When installing the aluminum profile moving caster, can turn the aluminum framing extrusion slightly and then install fixed.

7. Aluminum framing extrusion after assembly, should check whether the connection is tight.

8. After the installation is completed, you can tear off the protective film on the surface of the aluminum profile, and wipe the oil on the surface with alcohol slightly.

Previous : The advantages and operation requirements of aluminum alloy profiles are shared

Next : Industrial aluminum profile surface black cause

How to assemble and debug door and window aluminum profiles?

Jul .28.2023

The assembly and debugging of door and window aluminum profiles is one of the key links in the process of making doors and windows.

How to do a good job of cleaning industrial aluminum profiles?

Jul .17.2023

Spraying cleaning method of industrial aluminum profiles is widely used, because of complex equipment, high process requirements, poor cleaning effect, then how to better do spray cleaning of industrial aluminum profiles?

Aluminum extrusion profile six places are required during the stretching process

Jul .07.2023

The aluminum extrusion profile must be cooled to below 50 degrees before stretching. If the temperature is too high, stretching will not only burn the human body, the hair belt, but also expose absolute waste products such as bending, twisting, and poor performance before and after aging, because the stress in the aluminum alloy profile can not be completely eliminated.

Curtain wall aluminum profile purchase mainly see where?

Jul .06.2023

Appearance quality of curtain wall aluminum profile: the surface of anodic oxide film is not allowed to have electrical burns, oxide film falling off and other defects; Electrophoretic, powder, fluorocarbon profile paint film should be uniform, neat, smooth, do not allow wrinkles, cracks, bubbles, flow signs, inclusions and paint film fall off and other defects, but allow local film within 80 mm at the end of the profile.

Hammy Han