Industry News

How should aluminum profiles windows & doors be maintained?

Views : 123
Update time : 2022-10-14 11:08:17
1. Ensure cleanliness
When the aluminum profiles windows & doors are in use, the movements should be opened and closed as lightly as possible, and the force should not be too large or too violent; It is necessary to keep the doors and windows clean, especially the cleanliness of the sliding grooves; in the sliding grooves, the accumulated dust can easily cause difficulty in pushing and pulling aluminum profiles windows & doors, resulting in easy damage to the doors and windows, thus affecting the service life of the doors and windows.
2. Cleaning method
Scrub aluminum profiles windows & doors frequently to keep the surface clean and free from pollution and corrosion. When scrubbing, try to choose soft gauze or cotton silk, etc., so as not to damage the surface of doors and windows. When scrubbing aluminum profiles windows & doors, you need to remove the window, which can not only wipe clean, but also ensure safety.
3. Corrosion resistance
Try to avoid acid and alkaline chemicals from contacting the surface of aluminum profiles windows & doors. When there are stains and dirt, use a soft cloth with water or neutral detergent for cleaning, which can prevent doors and windows from being corroded.
4. Accessories maintenance
Regularly check all kinds of hardware accessories of aluminum profiles windows & doors. If any injure is found, restore or change them in time. If the chute has been used for a long time, you can apply a little paraffin oil or engine oil to reduce friction and keep doors and windows open and closed easily and flexibly. The sealing tops and glass strips of aluminum profiles windows & doors are the key components of sealing and thermal insulation. If they are aging, shrinking or loosening, they should be changed in time.
Related News
Read More >>
How to assemble and debug door and window aluminum profiles? How to assemble and debug door and window aluminum profiles?
Jul .28.2023
The assembly and debugging of door and window aluminum profiles is one of the key links in the process of making doors and windows.
How to do a good job of cleaning industrial aluminum profiles? How to do a good job of cleaning industrial aluminum profiles?
Jul .17.2023
Spraying cleaning method of industrial aluminum profiles is widely used, because of complex equipment, high process requirements, poor cleaning effect, then how to better do spray cleaning of industrial aluminum profiles?
Aluminum extrusion profile six places are required during the stretching process Aluminum extrusion profile six places are required during the stretching process
Jul .07.2023
The aluminum extrusion profile must be cooled to below 50 degrees before stretching. If the temperature is too high, stretching will not only burn the human body, the hair belt, but also expose absolute waste products such as bending, twisting, and poor performance before and after aging, because the stress in the aluminum alloy profile can not be completely eliminated.
Curtain wall aluminum profile purchase mainly see where? Curtain wall aluminum profile purchase mainly see where?
Jul .06.2023
Appearance quality of curtain wall aluminum profile: the surface of anodic oxide film is not allowed to have electrical burns, oxide film falling off and other defects; Electrophoretic, powder, fluorocarbon profile paint film should be uniform, neat, smooth, do not allow wrinkles, cracks, bubbles, flow signs, inclusions and paint film fall off and other defects, but allow local film within 80 mm at the end of the profile.