Company News

Do you know why the aluminum profiles of doors and windows are sprayed with fluorocarbon?

Views : 94
Update time : 2022-11-03 19:04:20
Among various coatings, fluororesin coatings have particularly superior properties due to the large electronegativity of the introduced fluorine element and strong carbon-fluorine bond energy, such as weather resistance, heat resistance, low temperature resistance, and chemical resistance. Unique non-stick and low friction.
1. Excellent anti-corrosion performance - thanks to the excellent chemical inertness, the paint film is resistant to acids, alkalis, salts and other chemicals and various chemical solvents, it provides a protective barrier for aluminum profiles; the paint film is tough - high surface hardness, impact resistance, buckling resistance, good wear resistance, showing excellent physical and mechanical properties.
2. Maintenance-free, self-cleaning - fluorocarbon coating has extremely low surface energy, surface dust can be self-cleaned by rainwater, excellent hydrophobicity (maximum water absorption rate is less than 5%) and oil repellency, extremely small friction coefficient (0.15 - 0.17 ), the aluminum profile will not stick to dust and scale, and has good antifouling performance.
3. Strong adhesion - it has excellent adhesion on the surfaces of aluminum, copper, stainless steel and other metals, polyester, polyurethane, vinyl chloride and other plastics, cement, composite materials, etc., and basically shows that it should be attached to any material. characteristics. High decorative - In a 60 degree glossmeter, it can achieve a high gloss of more than 80%.
4. Ultra-long weather resistance - the coating contains a large number of F--C bonds, which determines the superior stability of aluminum profiles, no chalking, no fading, and a service life of up to 20 years, which is more durable than any other type of coating better performance.
Related News
Read More >>
How to assemble and debug door and window aluminum profiles? How to assemble and debug door and window aluminum profiles?
Jul .28.2023
The assembly and debugging of door and window aluminum profiles is one of the key links in the process of making doors and windows.
How to do a good job of cleaning industrial aluminum profiles? How to do a good job of cleaning industrial aluminum profiles?
Jul .17.2023
Spraying cleaning method of industrial aluminum profiles is widely used, because of complex equipment, high process requirements, poor cleaning effect, then how to better do spray cleaning of industrial aluminum profiles?
Aluminum extrusion profile six places are required during the stretching process Aluminum extrusion profile six places are required during the stretching process
Jul .07.2023
The aluminum extrusion profile must be cooled to below 50 degrees before stretching. If the temperature is too high, stretching will not only burn the human body, the hair belt, but also expose absolute waste products such as bending, twisting, and poor performance before and after aging, because the stress in the aluminum alloy profile can not be completely eliminated.
Curtain wall aluminum profile purchase mainly see where? Curtain wall aluminum profile purchase mainly see where?
Jul .06.2023
Appearance quality of curtain wall aluminum profile: the surface of anodic oxide film is not allowed to have electrical burns, oxide film falling off and other defects; Electrophoretic, powder, fluorocarbon profile paint film should be uniform, neat, smooth, do not allow wrinkles, cracks, bubbles, flow signs, inclusions and paint film fall off and other defects, but allow local film within 80 mm at the end of the profile.