Company News

Do you know what are the welding methods of aluminum profiles?

Update time : 2022-12-09 17:30:22

The welding performance of aluminum profiles is good. For some aluminum profile products that are not convenient to be connected with corner code, such as aluminum alloy trays and special frame products, only welding can be used to connect each profile. What are the welding methods of aluminum profiles? Let's find out today:

1. Argon arc welding

This is the most common form of welding, and we often see traces of argon arc welding on other metals. Argon arc welding is also divided into tungsten argon arc welding and MIG welding. Tungsten argon arc welding is generally used for thin materials, and MIG welding is suitable for thick materials.

2. Spot welding

Spot welding, as the name implies, is to form solder joints between welding materials. Spot welding requires relatively high requirements for the schweisser and requires instantaneous high temperature heating. Before welding, it is necessary to remove dust, grease, layers, oxide film and other impurities on the surface of aluminum profile processing. After the solidification of the solder joint, the electrode pressure should be maintained for a period of time. If the electrode pressure is kept too short, it is easy to appear bubbles, cracks and other defects.

3.A-TIG welding

A-tig welding can greatly improve the penetration depth of aluminum profile weld, reduce welding deformation, improve the yield of finished products, and has a relatively wide application prospect.

4. Friction stir welding

Friction stir welding (FSW) is a solid-state joint technology for welding low melting alloy materials proposed by British Welding Institute in 1991. Similar to conventional friction welding, friction stir welding also uses friction heat as a heat source. The difference is that friction stir welding uses a stirring column to penetrate into the joint of the workpiece, and through high-speed rotation of the stirring column, high-speed friction with the welding workpiece, so that the material at the stirring site becomes heated and soft to complete the welding.

Previous : Advantages of aluminum radiator profiles

Next : Understand the technical requirements for aluminum radiator profiles extrusion?

How to assemble and debug door and window aluminum profiles?

Jul .28.2023

The assembly and debugging of door and window aluminum profiles is one of the key links in the process of making doors and windows.

How to do a good job of cleaning industrial aluminum profiles?

Jul .17.2023

Spraying cleaning method of industrial aluminum profiles is widely used, because of complex equipment, high process requirements, poor cleaning effect, then how to better do spray cleaning of industrial aluminum profiles?

Aluminum extrusion profile six places are required during the stretching process

Jul .07.2023

The aluminum extrusion profile must be cooled to below 50 degrees before stretching. If the temperature is too high, stretching will not only burn the human body, the hair belt, but also expose absolute waste products such as bending, twisting, and poor performance before and after aging, because the stress in the aluminum alloy profile can not be completely eliminated.

Curtain wall aluminum profile purchase mainly see where?

Jul .06.2023

Appearance quality of curtain wall aluminum profile: the surface of anodic oxide film is not allowed to have electrical burns, oxide film falling off and other defects; Electrophoretic, powder, fluorocarbon profile paint film should be uniform, neat, smooth, do not allow wrinkles, cracks, bubbles, flow signs, inclusions and paint film fall off and other defects, but allow local film within 80 mm at the end of the profile.

Hammy Han