Industry News

Do you know all these knowledge about motor housing aluminum extrusions?

Update time : 2022-10-08 11:40:39

Motor housing aluminum extrusions are devices that protect automotive motor components from dust and damage, which will provide automotive motors with reliable and consistent function and maintain good performance. Our motor housing aluminum extrusions are made only from the material of aluminum extrusions, which makes them durable and stretchable.

Motor housing aluminum extrusions are usually fabricated from aluminum extrusions. The equipment we have mass-produced will generally have a custom enclosure, but the enclosure is made of standardized custom or low-volume equipment. To meet the needs of automotive use, the housing has partial cutouts to accommodate cables, connectors, or conduits.

1. What are the conditions for purchasing motor housing aluminum extrusions?

1. No matter which brand of products you buy, you need to have reliable quality assurance;

2. It has good load-bearing capacity, which is the basic requirement for aluminum profile automobile motor housing;

3. Have a good temperature control system to operate at a high speed of the equipment;

4. Provide effective after-sales service to bring convenience to users' installation and maintenance;

In order to ensure the service life of the automotive motor, it is important to keep the operating temperature of the automotive motor within the design parameters of the insulation class. Any car motor that exceeds this temperature will cause the car motor to fail. Reasonable selection of motor housing aluminum extrusions can greatly ensure the service life of automobile motors. In addition, the outer casing of the motor not only protects the body and acts as a component mounting frame, but also has the functions of heat dissipation or sound insulation in a special type of motor casing.

Previous : What are the customization requirements and product advantages of aluminum profile shelf?

Next : What are the application advantages of LED aluminum profiles?

How to assemble and debug door and window aluminum profiles?

Jul .28.2023

The assembly and debugging of door and window aluminum profiles is one of the key links in the process of making doors and windows.

How to do a good job of cleaning industrial aluminum profiles?

Jul .17.2023

Spraying cleaning method of industrial aluminum profiles is widely used, because of complex equipment, high process requirements, poor cleaning effect, then how to better do spray cleaning of industrial aluminum profiles?

Aluminum extrusion profile six places are required during the stretching process

Jul .07.2023

The aluminum extrusion profile must be cooled to below 50 degrees before stretching. If the temperature is too high, stretching will not only burn the human body, the hair belt, but also expose absolute waste products such as bending, twisting, and poor performance before and after aging, because the stress in the aluminum alloy profile can not be completely eliminated.

Curtain wall aluminum profile purchase mainly see where?

Jul .06.2023

Appearance quality of curtain wall aluminum profile: the surface of anodic oxide film is not allowed to have electrical burns, oxide film falling off and other defects; Electrophoretic, powder, fluorocarbon profile paint film should be uniform, neat, smooth, do not allow wrinkles, cracks, bubbles, flow signs, inclusions and paint film fall off and other defects, but allow local film within 80 mm at the end of the profile.

Hammy Han