Industry News

Conveyor line aluminum profile selection and processing

Update time : 2022-09-05 19:59:07

With the rapid development of industrialization, production workshops in all walks of life are also in full swing. No matter what kind of workshop, there is an assembly workshop. The most common part of the assembly workshop is product transportation, and the most commonly used product transportation is the belt conveyor line.

Aluminum alloy profiles for supporting belt conveyor lines. The surface of the aluminum profile of the industrial assembly line is beautiful and corrosion-resistant. It is easy to disassemble and assemble without welding, and it is easier to clean. Considering various aspects, most customers will choose aluminum alloy profiles to build the belt conveyor line.

According to the different sections, aluminum alloy profiles can be divided into heavy and light ones. When selecting the support for the conveyor line, the weight of the conveyed product and the load of the entire conveyor line must be considered. Only in this way can the appropriate aluminum profile be selected, which is not only convenient to use but also saves costs. If the load is about one ton, it is generally recommended to use 8080 aluminum profiles with a larger cross-section; if the load is between 700 and 800 kg, it is recommended to use 4545/5050 or 6060 aluminum profiles. If it is a light conveyor line, more consideration is the 3030 and 4040 profiles. The material of the conveyor belt generally chooses rubber, canvas, PVC, PU and so on.

It is very convenient to build a belt conveyor line, and customers can also install it according to the drawings. Aluminum profile processing is also processed according to the drawings, whether it is tapping, punching, sawing, connecting.

Previous : Introduction of 10 advantages and application scope of aluminum radiator profiles

Next : Prospects for the use of aluminum profile frames

How to assemble and debug door and window aluminum profiles?

Jul .28.2023

The assembly and debugging of door and window aluminum profiles is one of the key links in the process of making doors and windows.

How to do a good job of cleaning industrial aluminum profiles?

Jul .17.2023

Spraying cleaning method of industrial aluminum profiles is widely used, because of complex equipment, high process requirements, poor cleaning effect, then how to better do spray cleaning of industrial aluminum profiles?

Aluminum extrusion profile six places are required during the stretching process

Jul .07.2023

The aluminum extrusion profile must be cooled to below 50 degrees before stretching. If the temperature is too high, stretching will not only burn the human body, the hair belt, but also expose absolute waste products such as bending, twisting, and poor performance before and after aging, because the stress in the aluminum alloy profile can not be completely eliminated.

Curtain wall aluminum profile purchase mainly see where?

Jul .06.2023

Appearance quality of curtain wall aluminum profile: the surface of anodic oxide film is not allowed to have electrical burns, oxide film falling off and other defects; Electrophoretic, powder, fluorocarbon profile paint film should be uniform, neat, smooth, do not allow wrinkles, cracks, bubbles, flow signs, inclusions and paint film fall off and other defects, but allow local film within 80 mm at the end of the profile.

Hammy Han