Coating not only makes the aluminum profile corrosion resistant but also reduces the cost

During the surface treatment of aluminum profile, soaking and drying are two intermediate strengths. The immersion is achieved by electrophoretic coating, using an electrochemical method, on the surface of the resinbased granules. On the existing image layer, we encounter the most transparent or other colored image layer.
Underwater immersion technology has been completed. This type of technology has a strong anticolor change performance, and is not easy to corrode, so it can be used for many other applications. On the other hand, painting is a mainstream method during painting.
It has excellent anti-corrosion properties, and it has one advantage: it is a lowgrade book. Due to the current financial situation, it is very convenient to use this kind of method, so it can be used with a variety of materials.
Comprehensive mechanical hammering, degreasing, heating, etc. every step, every step requires meticulous research.
At the same time, there is a small problem during the work, such as the appearance of the peel, which is why the powder is thick, or the furnace temperature is not correct, or the powder quality is not correct, or the temperature is changing. Mass and volume adjustment.
Occasionally, there is a sudden appearance of lacquer, this is because the temperature does not arrive, the powder body is not good, or there is a large difference in the processing results in the previous period, and when the ground is strengthened, the processing temperature is adjusted. The result is that the bottom is exposed, and the reason is that the powder is thick and thin. There is a slight difference in color, which is why powder work is not standard, and it is necessary to change the mold material work method. In addition to this, it is necessary to make revisions from time to time, such as problems with recurring issues, problems with circulation, etc.