Industry News

Attention of aluminum profile processing

Update time : 2022-12-05 18:33:48

Industry commonly used aluminum profile is a kind of assembly line profile, commonly used 4040 aluminum profile, 3030 aluminum profile, etc. However, aluminum profile processing is nothing more than drilling, cutting, tapping (threaded holes) and special surface treatment for extruded aluminum profiles. Here is to introduce what problems should be paid attention to in the process of aluminum profile processing?

As far as drilling is concerned, a lot of times it's not only aluminum profiles that have to be drilled, but most of the time we drill holes in the frame engineering during the assembly of aluminum profiles. When punching, we should position the punching machine correctly, and we should choose high-quality and qualified aluminum processing materials. Whether it is the surface of the plate or aluminum profile, the surface is smooth and flat and there is no burr after processing. The hole is also very smooth, if there is a burr, we use high-quality and qualified aluminum processing. Another important process in aluminum profile processing is tapping, which is the same as drilling. The tapping machine should adjust the position, choose the correct aperture size, and ensure that the threads of the thread holes are orderly. The other is cutting, now many aluminum processing manufacturers choose laser cutting, end face is very flat, high precision, generally controlled within + 0.2mm.

In addition to aluminum processing position and aluminum quality, attention should also be paid to the service life of the above equipment and possible problems in use. Therefore, in the processing of aluminum profiles, we should choose the right products and the right equipment. It is essential for the overhaul and maintenance of equipment.

Previous : What convenience does aluminum profile bring to life?

Next : Why do factory equipment frames all use aluminum framing extrusion?

How to assemble and debug door and window aluminum profiles?

Jul .28.2023

The assembly and debugging of door and window aluminum profiles is one of the key links in the process of making doors and windows.

How to do a good job of cleaning industrial aluminum profiles?

Jul .17.2023

Spraying cleaning method of industrial aluminum profiles is widely used, because of complex equipment, high process requirements, poor cleaning effect, then how to better do spray cleaning of industrial aluminum profiles?

Aluminum extrusion profile six places are required during the stretching process

Jul .07.2023

The aluminum extrusion profile must be cooled to below 50 degrees before stretching. If the temperature is too high, stretching will not only burn the human body, the hair belt, but also expose absolute waste products such as bending, twisting, and poor performance before and after aging, because the stress in the aluminum alloy profile can not be completely eliminated.

Curtain wall aluminum profile purchase mainly see where?

Jul .06.2023

Appearance quality of curtain wall aluminum profile: the surface of anodic oxide film is not allowed to have electrical burns, oxide film falling off and other defects; Electrophoretic, powder, fluorocarbon profile paint film should be uniform, neat, smooth, do not allow wrinkles, cracks, bubbles, flow signs, inclusions and paint film fall off and other defects, but allow local film within 80 mm at the end of the profile.

Hammy Han