Industry News

Aluminum profiles can do what finishing

Update time : 2022-11-22 15:15:03

Aluminum profile is a common profile in life. It has a very wide range of applications whether in some doors and windows manufacturing or in the manufacturing of some mechanical frames. It should be noted that although aluminum profiles are widely used, most of them need to go through some special process treatment to meet the subsequent production needs. What kind of finishing can be done on the aluminum profile?

1. Do passivation treatment on its surface. The passivation treatment of the surface of aluminum profile can make the surface of the metal not easy to occur oxidation reaction, which can effectively slow down the corrosion rate of the entire metal surface.

2. Anodizing. Using the principle of electrolyte, on the surface of aluminum alloy to be plated with other metals, so that it becomes an alloy, this kind of treatment can be local re-plating or effective correction of its surface. Generally, for relatively small workpiece, more will do rolling plating treatment.

3. Sand blast. For some more special workpiece, the surface needs to be sandblasted to increase the roughness of the material surface, so that it can better increase the adhesion of the surface of the object, so that it is more in line with the requirements of the entire production process.

Compared with other types of profiles, aluminum profiles have strong strength and are not easy to deformation in the subsequent application process, so they have been widely used in some building frames, doors and windows manufacturing industries. In some outdoor applications, it is necessary to pay attention to the anti-corrosion treatment of materials. Therefore, before finishing the aluminum profile, we should pay attention to the required process treatment according to the requirements of subsequent processing, so that the processed material can better meet the needs of the entire production and processing.

Previous : How about 4080 industrial aluminum profile for mechanical frame?

Next : Inlaid structure should be adopted in the mold of aluminum profile production

How to assemble and debug door and window aluminum profiles?

Jul .28.2023

The assembly and debugging of door and window aluminum profiles is one of the key links in the process of making doors and windows.

How to do a good job of cleaning industrial aluminum profiles?

Jul .17.2023

Spraying cleaning method of industrial aluminum profiles is widely used, because of complex equipment, high process requirements, poor cleaning effect, then how to better do spray cleaning of industrial aluminum profiles?

Aluminum extrusion profile six places are required during the stretching process

Jul .07.2023

The aluminum extrusion profile must be cooled to below 50 degrees before stretching. If the temperature is too high, stretching will not only burn the human body, the hair belt, but also expose absolute waste products such as bending, twisting, and poor performance before and after aging, because the stress in the aluminum alloy profile can not be completely eliminated.

Curtain wall aluminum profile purchase mainly see where?

Jul .06.2023

Appearance quality of curtain wall aluminum profile: the surface of anodic oxide film is not allowed to have electrical burns, oxide film falling off and other defects; Electrophoretic, powder, fluorocarbon profile paint film should be uniform, neat, smooth, do not allow wrinkles, cracks, bubbles, flow signs, inclusions and paint film fall off and other defects, but allow local film within 80 mm at the end of the profile.

Hammy Han