Company News

Advantages of automatic production line for aluminum profiles

Views : 78
Update time : 2022-11-15 18:42:14
Aluminum profile oxidation automatic production line is a new type of automatic equipment. The production line is widely welcomed by the aluminum industry for its labor cost saving, chemical consumption reduction, clean workshop environment, stable product quality and high production efficiency.
The automatic production line is mainly composed of automatic driving, automatic power supply (oxidation, coloring, electrophoresis), automatic cross-vehicle, automatic workpiece conveying system, automatic electrophoresis curing furnace, up and down system.
Compared with manual production line, automatic aluminum profile production line has the following advantages
1. The driving is no longer manual operation, which solves the problems of out-of-control product quality, excessive chemical consumption and high waste water treatment cost often encountered in the manual production line.
2. The process steps and cleaning time of the workpiece are executed according to the set process time. There are no problems such as job-hopping, reducing cleaning time, insufficient tilt of the workpiece and insufficient dripping time. This eliminates the problem of product quality instability which often occurs in the manual production line due to the inaccuracy of the driving operator's execution process.
3. When workers operate on the manual production line, the chemicals adhering to the workpiece are taken into the next process due to the lack of the inclination of the workpiece and the insufficient drop time, resulting in large chemical consumption.
4. In the manual production line, due to the large consumption of chemicals, it is necessary to increase the cleaning water to clean the workpiece. As a result, wastewater treatment capacity is increased, thus increasing the cost of wastewater treatment.
5. Reduce the number of operators and improve enterprise efficiency. In the automatic production line, walking, crossing, curing furnace, power supply and so on do not need manual operation, thus reducing the number of operators, improve the enterprise efficiency.
6. Safe and reliable, reduce accidents. In the oxidation production line, the general accidents are mostly caused by illegal operation, adopting automatic production line can completely avoid the accidents caused by equipment illegal operation.
Related News
Read More >>
How to assemble and debug door and window aluminum profiles? How to assemble and debug door and window aluminum profiles?
Jul .28.2023
The assembly and debugging of door and window aluminum profiles is one of the key links in the process of making doors and windows.
How to do a good job of cleaning industrial aluminum profiles? How to do a good job of cleaning industrial aluminum profiles?
Jul .17.2023
Spraying cleaning method of industrial aluminum profiles is widely used, because of complex equipment, high process requirements, poor cleaning effect, then how to better do spray cleaning of industrial aluminum profiles?
Aluminum extrusion profile six places are required during the stretching process Aluminum extrusion profile six places are required during the stretching process
Jul .07.2023
The aluminum extrusion profile must be cooled to below 50 degrees before stretching. If the temperature is too high, stretching will not only burn the human body, the hair belt, but also expose absolute waste products such as bending, twisting, and poor performance before and after aging, because the stress in the aluminum alloy profile can not be completely eliminated.
Curtain wall aluminum profile purchase mainly see where? Curtain wall aluminum profile purchase mainly see where?
Jul .06.2023
Appearance quality of curtain wall aluminum profile: the surface of anodic oxide film is not allowed to have electrical burns, oxide film falling off and other defects; Electrophoretic, powder, fluorocarbon profile paint film should be uniform, neat, smooth, do not allow wrinkles, cracks, bubbles, flow signs, inclusions and paint film fall off and other defects, but allow local film within 80 mm at the end of the profile.